Product Description
Overview:
This 2-Watt stereo transmitter wirelessly broadcasts a speaker’s voice, music, or any audio signal in the FM broadcast band so any regular car radio or handheld FM radio can receive the transmission. The T-588 transmitter features 3 main audio inputs that allow the direct connection of virtually any analog audio source, including a 3.5 mm jack for headset microphones, an XLR & ¼ inch combination jack with a selector for dynamic microphones, condenser microphones or line-level signals, and RCA stereo auxiliary input. It also has a recording output and a 3.5 mm monitor headphone jack.
Range:
The included telescoping antenna provides a small area of coverage (up to 650ft in all directions); however, the range can be greatly expanded with a remote antenna (specific to a particular frequency) to roughly 2 miles. Other factors contributing to the resulting range include the position and elevation of the antenna, obstacles, and the sensitivity of the radio receiver.
Features:
-3.5mm plug on the front for headset mics with mute button
-Dedicated volume and frequency dials on the front
-LCD display with blacklight
-3.5mm plug for headphones or external monitor
-Unique integrated interpreter or narrator monitor function
-Recording output
-Multiple inputs for any audio source (XLR, RCA,1/4″, Balanced, inputs for dynamic and condenser microphones, etc.)
-Gain control on the back
-Stereo or mono mode selector
-Power switcher from 0.1 and 2.0 Watts
-Frequency lock and audio level indicator
-FCC and Industry of Canada compliant
-US-based customer service
-One-year manufacturer’s warranty
Licensing:
Please consult a broadcast engineer to determine if this unit is right for your application and you are meeting all of the appropriate legal requirements. For use in the USA, please contact your local FCC office for information regarding permit or license that may be needed based on your application. For use in Canada, please contact your local Industry Canada office for information regarding permit or license that may be needed based on your application. For use outside the USA and Canada, please contact your local telecommunications authority.
Package Contents:
(1) T-588 FM Mono/ Stereo FM Transmitter (88.1-107.9 MHz)
(1) ANT-588 telescoping antenna
(1) PS-500 power supply with AC cord
(1) User manual
This transmitter is compliant with FCC Part 73 and Industry Canada BETS 6 & RSS-123.
FCC ID: 2ABY4T588
IC ID: 11832A-T588
Specifications: Enersound T-588 FM Transmitter | ||
RF | Operating Frequency | 88.1-107.9MHz Odd Frequencies only (US Version) |
Frequency Deviation | +/- 75kHz (Maximum Deviation) | |
Frequency Accuracy | +/- 0.005% stability from 0~+50 degree C | |
Transmitter Stability | +/- 20ppm | |
Output Power | 2 Watt adjustable | |
Antenna | Telescoping antenna with 50ohm impedance or optional remote antenna | |
Antenna Connector | TNC | |
Compliance | US: FCC Part 73, Canada: Industry Canada BETS 6 & RSS-123 | |
AUDIO | Frequency Response | 100Hz ~15KHz (+ 3db/-6db) |
Signal to Noise Ratio | 50db | |
System Distortion | < 0.3% (THD) | |
Audio Input 1 | 3-Pin XLR and ¼” (TRS) combination jack for MIC or LINE level Balanced or unbalanced. Nominal input level 0/56dbu (0.77V/1.3mV) (line/mic) | |
Phantom Power:12VDC PIN 2&3 on XLR or Tip and Ring on ¼” TRS Jack | ||
Audio Input 2 | 2 RCA Jacks, unbalanced Stereo Line Level -10dBu nominal, 100k ohms | |
External Monitor In. | RCA Jack, unbalanced, Line Level -10dBu nominal, 100k ohms. | |
REC Output | RCA Jack, unbalance output, Line Level -10dBu nominal, 10 ohms. | |
MIC Input | Front panel: 3.5mm 1/8’’ TRS jack, supplies +DC on tip for electret mics. | |
Audio Processing | Built-in signal compression 2:1. | |
Headphone Out. | Front panel: 3.5mm stereo TRS jack adjustable output level, | |
Max Power 61mW @8ohm, Impedance: 4~16ohm. | ||
POWER | Power Supply Type | In Line, UL listed |
Power Supply In. | 100~240VAC, 50-60Hz | |
Power Supply Out. | 15VDC, 1A | |
Power Supply Connector | Output Connector: .02 in.(5.0 mm) OD, .01 in.(2.5mm) ID, barrel type | |
ENVIROM. | Temp. Operation | -5℃ (23F) to + 40℃ (104F) |
Temp. Storage | -20℃ (-4F) to + 60℃ (140F) | |
Humidity | 0~95% Relative Humidity | |
PHYSICAL | Dimensions | 5” x 5.5” x 1.75” (127 x 140 x 45 mm) (DxWxH) |
Color | Black | |
Unit Weight | 1.2 lbs. (0.54 Kg) | |
Power Supply Weight | 0.5 lbs. (0.22 Kg) with AC cord | |
Shipping Weight | 2.2 lbs. (1.1 Kg) | |
Rack Mounting | One (1.5) rack space height, 1/2 rack space wide, One or Two transmitters can be mounted in 1.5 rack space, Option rack mount (RM-501 or RM-502) |